AtmoExplorer Temperature And Humidity Chamber

Feature of AtmoExplorer Temperature And Humidity Chamber:

1. The AtmoExplorer Temperature & Humidity Chamber is used for testing the performance of various materials under different environmental conditions. It is suitable for testing the heat resistance, cold resistance, dry resistance, wet resistance, and other properties of materials. The testing chamber is applicable for quality testing of products, such as electronics, electrical appliances, mobile phones, communication devices, instruments, vehicles, plastic products, metals, food, chemicals, construction materials, medical equipment, and aerospace products.
2. Wide range of applications it can simulate high temperature, low temperature, high humidity, low humidity, and is suitable for testing requirements in various fields and industries such as electronics, materials research, medicine, automobiles, food, etc.
3. Excellent both on control precision and uniformity of temperature and humidity
• Temperature and humidity control precision: ±0.5℃; ±3％RH
• Temperature and humidity uniformity: ±2℃; ±3.0％R
4. Achieve heating and cooling quickly when unloaded,it can achieve heating from room temperature to 100℃ within 30 minutes, It can also achieve cooling from room temperature to -40℃ within 60 minutes.
5. Intuitive and practical screen, easy to operate AtmoExplorer Temperature & Humidity Chamber has a 7-inch large touch screen that displays information in both Chinese and English. The set values (SV) and actual values (PV) of temperature and humidity are displayed directly, as well as the currently executing program number, segment information, remaining time, and number of cycles. It also has a separate program editing screen.
6. Stable operation, originated from high-quality insulation materials and humidifiers. The heating element is made of spring-type nickel-chromium wire,and the  humidifier is a UL-shaped humidifier in the form of stainless steel electric steam generation.
7. AtmoExplorer Temperature And Humidity Chamber with high quality refrigeration system and refrigeration auxiliary parts. Tecumseh fully hermetic high efficiency compressor from France, solenoid valve from Japan, and pressure controller and oil separator of international famous brand.
8. A variety of safety protection the burn prevention switch,the high-pressure protection for the compressor,the overheating protection for the compressor, the over current protection for the compressor,the no-fuse switch protection,the short-term water shortage alarm and the long-term water shortage shutdown protection.
9. Various sizes can be customized such as 80L, 150L, 225L, 408L, 800L, 1000

Specifications of AtmoExplorer Temperature and Humidity Chamber:

1. Temperature range： -40℃～+150℃
2. Humidity range：20-98%RH
3. Temperature and humidity control accuracy：±0.5℃；±3％RH
• Note: To achieve the performance above , it should be measured after 30 minutes of temperature stabilization.
4. Temperature and humidity distribution uniformity: ±2℃; ±3.0%R.H.
• Note: To achieve the performance above , it should be measured at 1/6 position from each wall of the test area, and need to be measured after 30 minutes of temperature stabilization.
5. Heating time: from room temperature to 100℃, within 30 minutes (when no load)
6. Cooling time: from room temperature down to -40℃, within 60 minutes (when no load)
7. Testable area: 1000*1000*1000mm
8. Test box door: a total of 1, single piece door, left open
9. Controller specifications
1. Accuracy: Temperature ±0.1℃ + 1digit , humidity ±1%RH + 1digit.
2. Resolution: temperature ±0.1, humidity ±0.1%RH
3. Temperature slope: 0.1~9.9 can be set.
4. With upper and lower limit standby and alarm function.
5. Display the current program number, number of segments, remaining time and number of laps
6. Temperature and humidity program setting value is displayed in a circular curve, with instant display of program curve execution function
7. Separate program editing screen, at least 4 temperature and time steps can be input on each page
8. Program capacity and control function.
9. Program group: 120 PATTENs max.
10. Available memory capacity: 1200 SEGMENTS.
11. Repeatable commands: up to 999 times for each command.
12. SEGMENTS time setting 0~99Hour59Min.
10. Power   380V 50HZ   3∮ 5 wire 12 KWA
11. Weight  about 500KG
12. Dimensions
• (Inner Box )1000*1000*1000mm(WxDxH)
• (Outer Box)1250*2050*2090mm(WxDxH)