Testing consumables
Features of JC Penney Testfabrics MFF49 multifilament fabric:
- JC Penney Testfabrics MFF49 multifilament fabric is used in color fastness testing/strong color assessment or J.C Penney testing.
Features of AATCC 9-Step Chromatic Transference Scale:
1. The AATCC 9-Step Chromatic Transference Scale is used to visually evaluate color transfer or staining. The scale has five hues (red, yellow, green, blue, and purple plus gray), all selected from the Munsell Book of Color. Includes a copy of AATCC EP8, AATCC 9-Step Chromatic Transference Scale.REPLACE ANNUALLY. 2. Used to assess staining on multifiber or adjacent fabrics after colorfastness tests to: Washing, Crocking (rubbing), Perspiration, Water, seawater, chlorinated water, etc.
Applications of AATCC Standard Blue Wool:
- The AATCC Standard Blue Wool is an international standard used to evaluate the lightfastness of textile materials under exposure to light. It is an essential tool for textile laboratories, research institutes, and manufacturing enterprises.
Applications of SDCE blue wool fabric test for color fastness:
- SDCE Blue Wool Color Fastness Tester is azoic cotton fabric with specific fading properties, which vary with relative humidity
Application of CTTC Gray Scale color Card :
Gray ruler is mainly used in the garment and textile dyeing industries. It is used to measure the color fastness of fabrics after using on the color fastness tester.
- CTTC Gray ruler is divided into two types: color change and color fading.
Application of Multifibre adjacent fabric DW James Heal:
- Multifibre adjacent fabric DW James Heal for a variety of Color Fastness tests, these fabrics are manufactured with the necessary composition to comply with the requirements of ISO 105 F10, in accordance with the AATCC test method
- 702-500: Multifibre adjacent fabric DW – per roll (10m)
- 702-502: Multifibre adjacent fabric DW – per roll (50m)
- 702-503: Multifibre adjacent fabric DW – per roll (100m)
- 702-520: Multifibre adjacent fabric DW – per box (250 pieces) 10 x 4cm (gimped edges)
- 702-521: Multifibre adjacent fabric DW – per box (200 pieces) 10 x 5cm (gimped edges)
Application of James Heal makeweights:
- James Heal makeweights, also known as 'ballast' or 'loading fabrics' are used to make up the load in washing, dry cleaning, dimensional stability, drying or durability tests
- 702-530: Polyester makeweights – per pack (1kg) – 300x300mm, 40g approx
- 702-532: 100% Polyester ballast (Type 3) – per pack (1kg) -210 x 210mm, piece mass 50g
- 702-536: 100% Cotton ballast (Type 1) – per pack (1kg) – 92 x 92 cm, piece mass 320g
- 702-535: 80/20% Wool/Cotton ballast suitable for EN ISO 3175 – 2:2010 – per pack (1kg)
Application of James Heal Test materials:
- Materials used in abrasion testing with Martindale
- 701-202: Martindale Abrasive cloth SM25 - 5m/ pack
- 701-200: Martindale Abrasive cloth SM25 - roll 25m
- 701-203: Martindale Abrasive cloth SM25 - roll 50m
- 701-207: Pre-cut Dics of Martindale Original Abrasive cloth SM25 140mm diameter - 100pcs/ pack
- 701-238: Abrasion Cloth, 165mm diameter - 100pcs/ pack
- 714-602: Non-woven felt pads, 140mm diameter - 20pcs/ pack
- 714-622: Non-woven felt pads, 165mm diameter - 20pcs/pack
- 714-612: Woven felt pads, 140mm diameter, - 20pcs/ pack
Application of James Heal Test materials:
- Materials used in abrasion testing with Martindale
- 701-202: Martindale Abrasive cloth SM25 - 5m/ pack
- 701-200: Martindale Abrasive cloth SM25 - roll 25m
- 701-203: Martindale Abrasive cloth SM25 - roll 50m
- 701-207: Pre-cut Dics of Martindale Original Abrasive cloth SM25 140mm diameter - 100pcs/ pack
- 701-238: Abrasion Cloth, 165mm diameter - 100pcs/ pack
- 714-602: Non-woven felt pads, 140mm diameter - 20pcs/ pack
- 714-622: Non-woven felt pads, 165mm diameter - 20pcs/pack
- 714-612: Woven felt pads, 140mm diameter, - 20pcs/ pack
Application of Pre-cut Discs of Foam:
- Abrasive sponges are used for abrasion testing machines, Pre-cut with 38mm diameter round pieces.
- Quantity: 2000 pieces
Application of James Heal detergents:
- James Heal detergents, which are used for both colour fastness and shrinkage testing. Following the relevant regulations as specified in both American, European, and International standards.
- 706-657: Standard Soap – per tub (2kg)
- 706-652: ECE Formulation Non-Phosphate Reference Detergent (A) [Without Optical Brightener] – per tub (2kg)
- 706-666: IEC Formulation Non-Phosphate Reference Detergent (A) [Without Optical Brightener] – per tub (2kg)
- 706-735: TAED [Tetra-acetylethylene diamine] -92% activity – per pack (250g)
- 706-743: TAED [Tetra-acetylethylene diamine] -92% activity – per pack (500g)
- 706-672: IEC Formulation Non-Phosphate Reference Detergent (A*) [Without Optical Brightener] – per tub (2kg)
- 706-650: ECE Formulation Phosphate Reference Detergent (B) [Without Optical Brightener] – per tub (2kg)
- 706-654: IEC Formulation Phosphate Reference Detergent (B) [Without Optical Brightener] – per tub (2kg)
Application of James Heal Phenolic Yellowing Test Kit:
- James Heal Phenolic Yellowing Test Kit, redictive phenolic yellowing test kit is designed to assess the potential for either white or pastel-coloured yarns, fabrics or garments to suffer from ‘yellowing.’ This is often a common occurrence amongst light coloured fabrics which can be caused due to both chemical and environmental factors, and fabric ageing.
- 706-820: Impregnated test papers 100 x75mm – per pack (150)
- 706-822: Impregnated test papers 100 x75mm – per pack (200)
- 706-720: Impregnated test papers 100 x75mm – per pack (50)
- 706-709: Control fabrics 100 x 30mm – per pack (25)
- 706-792: BHT – free polythene flim – 63 microns thick – per box (100 pieces: 400 x 200mm)
- 766-201: Grey scale for assessing staining ISO 105 A03
Features of James Heal Grey Scale:
- James Heal Grey Scale used to evaluate color change and staining during color fastness testing. Both scales are used for visual evaluation to allow you to assign a rating from 1 to 5.
- 766-200: Grey scale for assessing change in colour ISO 105 A02
- 766-201: Grey scale for assessing staining ISO 105 A03
- 766-205: Grey scale for assessing change in colour JIS (Japanese)
- 766-204: Grey scale for assessing staining JIS (Japanese)
- 766-512: Grey scale for color change AATCC
- 766-513: Grey scale for staining AATCC
- 766-510: Chromatic transference scale (9 step) AATCC
Application of JIS Cotton L0803:
- JIS Cotton L0803 is a standard single-fiber white fabric used for JIS color fastness testing
- Specification: 100cm × 90cm
- Product code: 670101
Application of Wool JIS L0803:
- Wool JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
- Specification: 100cm × 70cm
- Product code: 670102
Application of Silk 2-1 JIS L0803:
- Silk 2-1 JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
- Specification: 100cm × 90cm
- Product code: 670103
Application of Silk 2-2 JIS L0803:
- Silk 2-2 JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
- Specification: 100cm × 70cm
- Product code: 670104
Application of Nylon JIS L0803:
- Nylon JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
- Specification: 100cm × 120cm
- Product code: 670108
Application of Polyester JIS L0803:
- Polyester JIS L0803 is a standard single-fiber white fabric used for color fastness testing according to JIS standards
- Specification: 100cm × 120cm
- Product code: 670110
Application of Multifiber JIS L0803:
- Multifiber JIS L0803 is used for color fastness test according to JIS standard
- Specification: 50cm × 100cm
- Fiber composition: Cotton, nylon, acetate, wool, rayon, acrylic, silk, polyester
- Product code: 670112
Features of ISO gray scale:
- ISO gray scale manufactured by SDC - UK, is an indispensable device in the garment industry, used to check the color change of products after going through physical, mechanical and chemical influences.
- This product color change is divided into 2 separate categories:
- Color Change: color change before and after testing
- Color Stain: color stain on materials that are not dyed and in contact with the test product.
Features of Polyester Ballast:
- Polyester Ballast used to ensure that a wash load used for garment testing is of a sufficient weight. This closely simulates the washing of a garment in domestic washing machines.
- 4105: Polyester Makeweight – 20x20cm 1 kg pack
- 4110: Polyester Makeweight – 30x30cm 1 kg pack
- 4116: Cotton Makeweight – 92x92cm 1.6 kg pack
- 4118: Cotton/Polyester Makeweight 50/50 92x92cm 1.3 kg pack
- 4120: Wool/Cotton Makeweight – 80/20 – 30x30cm 0.7 kg pack
- 4125: Polyester Makeweights – 40cm x 40cm 1 kg Pack
Feature of SDCE Standard Reference Detergents:
Character of Polyester Adjacent Fabrics ISO 105-F04:
- ISO 105-F04. For use as an adjacent fabric when testing fabrics for Colour fastness to washing and wet contact tests, ISO 105 Group C and Group E. It can be purchased by the metre, in a 5 metre pack or in 10cm x 4cm cut pieces.
- 1705: metres
- 1720: 5 metre Pack
- 1731: 10 x 4 cm (Gimped)