Gester
Application and feature of Random Tumble Pilling Tester GT-C19B:
- Random Tumble Pilling Tester GT-C19B is used to determine the pilling and fuzzing characteristics of textile fabrics. Precision high-speed impeller for agitating the test specimens against cork lining for a pre-determined time controlled by a timer and audible alarm. Compressed air is also injected into the chamber to assist in the tumbling action. Laboratory standard compressed air supply required.
- Random pilling tester: intelligent interface to guide the user.
- Flexible system maximizes throughput and minimizes downtime.
- Interchangeable impellers for different global standards.
- Random Tumble Pilling Tester Stable propeller and rotation speed.
Application and feature of Sample Buffing Machine GT-KB57:
- Sample Buffing Machine GT-KB57 can grind the surface of material and get the required thickness of materials for testing.
- Operated by wrench, it could be adjusted to the position of up / down, left / right, back /forth,for trimming.
Feature of Bally Leather Flexing Tester GT-KC10A:
- This Bally resistance flexing tester GT-KC10A is used to determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
- Bally leather flexing tester: test specimen is folded in half then one end is secured in a clamp. The test specimen is then turned inside out and the free end secured in a second clamp at 90 degrees to the first. The first clamp is repeatedly oscillated through a fixed angle at a defined rate causing the test specimen to flex. At set intervals the number of flexing cycles is recorded and the damage to the test specimen is visually assessed. The bally flexometer test can be carried out with wet or dry test specimens at ambient.
Application and feature of Martindale GT-C13 For Testing The Abrasion And Pilling:
- Martindale GT-C13 For Testing The Abrasion And Pilling is the standard method of determining the wear resistance of textiles or leather and the resistance to pilling. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters. Adaptable to test a wide range of applications including textiles, socks, leather, coated upholstery, carpets, wood and shirt collars.
- Four models are available, with 4, 6, 8 and 9 Abrading Tables respectively.
- Test Standard: Lissajous figure.
- Working positions: 4, 6, 8, 9 optional.
Features and benefits of fabric Wascator Automatic Shrinkage Tester GT-D34:
- GT-D34 accelerated washing machine for knitted and woven fabrics to evaluate shrinkage according to international test methods. Also used to evaluate fabric stability, color fastness, finish fastness, twisting and pilling when washed.
- MCU program controller, built-in ten sets of washing programs according to ISO requirements and operator programming capabilities.
- Wascator GT-D34 washing tester does not need to be fixed to the ground with foot screws, and operates stably;
- Soft connection between rotating cage and support, low vibration and noise;
- Variable frequency motor, smooth transition between high speed and low speed, increase the low temperature of the motor.
- Blue fluorescent LCD screen, dynamic icon display test status, more eye-catching and convenient operation.
- Fabric shrinkage meter Touchless capacitive water level meter for accurate and reliable measurement of water level
Application and feature of ICI Pilling And Snagging Tester GT-C18:
- ICI Pilling And Snagging Tester GT-C18 used to determine the surface pilling and snagging properties of both woven and knitted materials.
- Simplified designing, more convenient to operate, and easy to maintain.
- Synchronous speed motor drives the test boxes, ensuring constant speed of rotation.
Application and feature of Digital Fabric Elmendorf Tearing Strength Tester GT-C11B:
- Digital Fabric Elmendorf Tearing Strength Tester GT-C11B is designed for Elmendorf method tearing resistance test of textile, non-woven fabrics, paper, paper board, thin film, ventilation tape, metal sheet materials and etc.
- Digital Fabric Elmendorf Tearing Strength Tester GT-C11B: advanced calculation methods make sure precision test & good repetition.
- Microcomputer system, can do auto test, calculate, analysis result, print test report.
- upload the test data.
Application and feature of UV Accelerated Weathering Tester GT-C29:
- GT-C29 UV Accelerate Weathering Tester use UVA-340 fluoresvent UV lamp as light sources which can simulate the harm of sunshine, rain and dew. The operating principle of this machine is combined the ultraviolet rays, rain, high-temperature, condensation and darkness as a circulation and repeat the circulation automatically. We can get the weathering test result of specimen by these circulations. The UV Accelerate Weathering Tester can reproduce the months and years harm in several days or weeks. The harm includes color fading, discoloring, chalkiness, cracking, muddy, bubble, embrittlement, intensity, recession, oxidation etc.
- The case is made from numerical control equipment,which is with advanced technology, smooth lines, beautifully designed.
- Accelerated weathering tester: material of the cabinet is thickness 1.2mm,SUS304# advanced stainless steel.
- Air channel in the cabinet applies single-cycle system and a import axial flow fan improves the air flow ability of light, heating ability, and also significantly improves the temperature uniformity in the test chamber.
Feature of Perspiration Tester GT-D09:
- Perspiration Tester GT-D09 apply for testing perspiration resistance color fastness of all kinds of textile materials & dyeing, colorful textile and test for their perspiration resistance, waterproof, seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate resistance and other performance.
- Perspiration tester: steel frame and heavy pouch made of 316L stainless steel, it can acid-bases, corrosion resistance for long time.
- Perspiration fastness tester provides ISO and the AATCC acrylic separator plates.
- Perspiration tester provides ISO and the AATCC standard pressing weights.
- The perspiration test request to use high accuracy drying oven.
Application and feature of AATCC Standards Electronic Crockmeter GT-D04:
- AATCC Standards Electronic Crockmeter GT-D04 is used to determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results.
- AATCC Crockmeter Metal box, High-temperature baking coating, easy maintenance.
- Electric motor, fitted with a pre-determined electronic counter for strokes up to 9999, experiment complete successfully, automatic stop.
Application and feature of Taber Abrasion Tester GT-C14B:
- Taber Abrasion Tester GT-C14B is used to determine the wear resistance of materials and assess its wear resistance degree, like measuring its mass loss, thickness loss, and transmittance etc.
- It’s applicable for flat products, like suitcases, carpet, cardboard, clothing, glass, plastic coatins, metal coating, paint, varnishes, decorative sheets, high pressure sheets, plastics, textiles, flexible floor mats, traffic paint, tile, anodizing layer, blankets, electronic components, decorative plates, wax, label, leather, dental materials, automobile interior decoration, resin, furniture, etc.
- Unique wear process. Place test sample on turntable and two abrasive wheel press on material to make material to wear.
Application and feature of Random tumble pilling testing equipment GT-C19A:- Random tumble pilling testing equipment GT-C19A determined for testing the peeling strength between sole and upper of a whole shoe or between outsole and medium bottom.
- This Pilling Testing Machine Blades are made of stainless steel 306.
- Precision high-speed impeller for agitating the test specimens.
- Scientific and reasonable mechanical structure design let noise≤50db.
Application and feature of Large Torque Fixture GT-M40:
- Large Torque Fixture GT-M40 is the assistant tool for toys torque test.
- Buttons, eyes, decorative sheet and other things on the toys
- Toys or toys parts made of expandable material
- Glued wooden toys
- Toys protrusion protector or projectiles impacted surface protector
- Mouthpiece of mouth actuated toys or other parts of toys intended to be placed on the mouth
Feature of Temperature And Humidity Test Chamber GT-C52:
- Temperature And Humidity Test Chamber GT-C52 is for conditioning of samples prior to testing. It also can be used for a variety of materials of high - low temperature alternating test. The test temperature, humidity, time can be programmed.
- Temperature and Humidity Climatic Test Chamber: High quality appearance, Matte Line processing on the surface, and embedded and non-counteractive handle, easy operation, safe and reliable.