Testing equipment
Features of Martindale abrasion & pilling tester RF3169N:
- The Martindale Abrasion & Pilling Tester RF3169N is used to determine the abrasion and pilling resistance of all types of textile fabrics. The samples are rubbed against the reference abrasive at a specific pressure and rotated continuously.
- The 7-inch color touchscreen is intuitive and easy to use.
- The RF3169N has single or multi-segment test modes.
- Super activity of the facility.
- Switch mode to a physical piece. No motion upgrades are required for abrasive assembly and sample testing.
- The Martindale Abrasion & Piling Tester has 4 rotation speeds to choose from.
- The Lissajous figure can be customized in the software control section.
- Two sizes of Lissajous are available for different standards and method testing.
- Sample support stand, balance made of stainless steel for more durability.
Feature of SW-12G Color fastness tester to washing:
- SW-12G dry cleaning color fastness tester is used to test the color fastness to washing, dry cleaning and shrinkage of various fabrics, and also to test the color fastness to washing dyes.
- 7-inch multi-function color touch screen control;
- SW-12G automatically controls water level, automatically takes water, drains function and sets anti-dry burning function;
- High quality stainless steel painting process, beautiful and durable;
Features of SmartShrink rate tester:- The SmartShrink Shrink Rate Tester determines a variety of 5-second shrink rate test results for fabrics after washing, steaming and dry cleaning.
- SmartShrink photographed the fabric sample using the camera featured above, automatically measured the distance between marked points, and calculated the inspection results using the patented cupping inspection algorithm. by ChiuVention. The resulting test results will be shared with the IoT-connected SmarTexLab application installed on computers and smartphones.
- International brands and accredited testing organizations such as Anta, Adidas, Texwinca and ITS have widely used SmartShrink. Can connect to ERP or LIMS system. Test results can be uploaded directly to the laboratory's LIMS system or the factory's ERP.
- SmartShrink can help you manage data inspection conveniently and effectively.
Application and feature of Random Tumble Pilling Tester GT-C19B:
- Random Tumble Pilling Tester GT-C19B is used to determine the pilling and fuzzing characteristics of textile fabrics. Precision high-speed impeller for agitating the test specimens against cork lining for a pre-determined time controlled by a timer and audible alarm. Compressed air is also injected into the chamber to assist in the tumbling action. Laboratory standard compressed air supply required.
- Random pilling tester: intelligent interface to guide the user.
- Flexible system maximizes throughput and minimizes downtime.
- Interchangeable impellers for different global standards.
- Random Tumble Pilling Tester Stable propeller and rotation speed.
Features of RF8120EU color viewing cabinet:- RF8120US color viewing cabinet is used to compare and evaluate color product prices accurately and consistently, with European standard brightness.
- Touch screen.
- Management mode by each light source or in general.
Features of RF8120US color viewing cabinet:
- RF8120US color viewing cabinet is a color assessment cabinet used for visual evaluation of color under controlled and standard lighting conditions.
- Touch screen.
- Management mode by each light source or combination.
Features of GESTER GT-KB06 shoe sole durability tester:
- GESTER GT-KB06 shoe durability tester is used to measure the ability of shoes in continuous movement.
- Before test, plunge
some holes at the maximum bending position, and mount specimen at both grips,
one fixed, one movable. Specimen runs flexing owing to the movement of machine.
After a certain test cycles, remove the specimen and check its difference of incision
length.
- Body paint baking
processed, easy for maintenance.
- Fixture in aluminum material and surface
processed with oxidation.
- Equip with digital
counter, automatically stop after test finished.
Features of the DR-XM14A Leather Flex Tester:
- The DR-XM14A Leather Flex Tester is used to determine the folding resistance of dry or wet leather or leather coatings.
- This method is applicable to all flexible materials and in particular to leather, coated fabrics and textiles used for footwear uppers.
Features of Y(B)571JIS Friction Fastness Tester:
- This Y(B)571JIS friction fastness tester is specially designed to perform crockmeter test on the color fastness change of textile, printing and dyeing products and other manufactured articles after specific orbital friction.
- Single-chip microcontroller controller with adjustable speed.
- Word-top brand motor, linear guide rail, low noise, suitable for long-term operation.
- Thin-film LCD display.
- Friction cycle is freely adjustable, capable of forward and reverse counting, automatic stop with alarm when reaching the set value.
Features of GT-KC10C footwear bending tester:
- The GT-KC10C Footwear Bending Tester determines a material's resistance to cracking or other forms of damage when flexed. This method is applicable to all flexible materials and specifically to leather, coated fabrics and textiles used in footwear uppers.
- Material of outer compartment: 2mm double-sided color-coated steel with powder-coated surface.
- Material of the inner cavity: using SUS304 stainless steel, seamless welding. Besides, the outer structure of the inner cavity is reinforced with 10mm steel plates to meet the structural strength requirements of the bending test.
Characteristics of DR-XZ10 foot operation tester:
- The DR-XZ10 Heel Performance Tester is used to determine the resistance of women's shoes to receiving occasional heavy beatings during wear.
- A Go leg is clamped with the top tip and the vertical stem is subjected to a back and forth swing by a pendulum striker.
- The power of the blow increased continuously until it failed at Gothic's leg.
Features of heel measuring machine DR-XZ06:
- The heel shoe tester DR - XZ06 is manufactured from excellent materials to ensure stability and durability.
- Test the height and angle of the adjustable heel.
- The number of impacts can be previously set and the machine will perform the test until the device or the specifically determined number of impacts is reached.
- Equipped with LCD screen and intelligent digital controller, simple and friendly operation.
- Configured with a precision switch to apply energy precisely to the specimen.
Characteristics of YG(B)611Y yellow aging tester
- The YG(B)611Y yellowing aging tester uses a simulated solar lamp of the anti-yellowing box to simulate the natural irradiation environment and a temperature control device to evaluate the anti-yellowing ability of the test sample under natural light by observing the yellowing degree of the test sample after a certain distance and time of irradiation.
- Place the test sample in a high temperature environment, after a certain period of time, evaluate the heat resistance of the test material by evaluating the degree of change in the test sample's appearance and comparing the physical change.
Features of ICI Mace Snag Tester:
- SmartSnag ICI Mace Snag Tester determines the degree of hooking (yarn pulls out of the fabric) under normal wear. It can test the hooking of outerwear knitted fabrics and other fabrics that are prone to hooking. This includes chemical fibers, filaments, and their deformed yarn.
- The test’s principle is this: set the cylinder-shape sample on the cylinder. Then, place a chain-hanging nail hammer on the sample. The cylinder rotates at a constant speed. The hammer is randomly flipped and jumped on the specimen’s surface. This process causes the fabric to gradually produce hooks.
Characteristics of random clumping tester RF3192N:
- RF3192N Random Pilling Tester is a Randomly Rolled Ball Tester, the test fabric and cotton fabric are introduced into the testing room with a soft plastic fabric sheet, the steel wheel rotates at a steady speed, and at the same time, compressed air is introduced inside to let the test fabric roll over the plastic fabric sheet to determine the jumping and feathering properties of the textile fabric.
- Applicable to most types of textiles.
- The RF3192N is designed for two traditional test boxes.
Features of automatic testing instrument GT-C27:
- GT-C27 Automatic Air Permeability Tester For testing the air permeability of woven fabrics, knitted fabrics, non-woven fabrics, Protective Pants, industrial filter materials, etc.
- 7-inch touch screen control also works by connecting to a computer
- Full range and auto-detection.
- Check head size can be automatically recognized and replaced very simply and conveniently.
Features of fabric washing color fastness tester GT-D07:
- Fabric washing color fastness tester GT-D07 is used to test the degree of change in color fastness of dyed textile fabrics after washing. The machine not only tests color fastness to washing but also tests color fastness to washing. dried..
- Its washing fastness test box and test cup use stainless steel material, capable of withstanding high temperature, acid-base, corrosive function.
- Equipped with door safety switch, can protect from burns or injury.
- Equipped with process timer, digital temperature controller, automatic temperature and time control, it has warning hint while the test is finished.
- Cup coupling mode can be customized according to customer requirements.
Feature of Crocktec Auto:
- The Crocktec is a crockmeter which is used to determine colour fastness to rubbing (crocking). A crocking test shows the resistance of the colour of a textile and other materials to rubbing off and staining.
- The Roaches Crocktec is available in both motorised and hand-operated models and they are designed to allow everybody (with the correct consumables) to be able to perform fabric crocking testing procedures.
Application of guaranteed color tester GT-D05:
- Fabric color fastness tester GT-D05 is used to determine the fastness of fabric to dry or wet rubbing.
- The machine is used in many industries such as textiles, fabrics, weaving, etc.
- The machine is made of metal box material, high temperature resistant coating, easy to biologically protect and clean the machine.
Feature of ICI Mace Snag Tester:
- The ICI Mace Snag Tester has been developed to determine the snagging resistance of heavy duty fabrics.
- The apparatus is supplied with 4 rotating cylinders which are fitted with felt sleeves and covered with the test fabric. The number of rotations are controlled by a pre-set electronic counter.
- Rotating cycle number can be pre-set and displayed on the digital counter.
Feature of Abrasion & Pilling Tester:
- Martindale is globally recognised as a definitive apparatus for determining the propensity of a substrate for pilling and the determination of resistance to abrasion.
- It is the perfect choice for organisations practicing lean manufacturing, Six Sigma, 5S or other certifications where traceability and location are key requirements
- Constructed from only the highest grade materials, Roaches Martindale is a robust unit built for accuracy and reliability.
Feature of Opti-Air Fabric Air Permeability Tester:
- The Roaches Opti-Air is used to determine the air permeability of conventional textile, non-woven textiles, coated fabrics, paper and leather.
- Touch screen control interface
- WiFi connectivity
- Results exported through SD card or WiFi
- Easy inter changing test heads
- Automatic aperture selection according to fabric performance
Feature of Pneumatic bursting strength tester:
- The Opti-Burst is for detecting and measuring the bursting strength, distension and fatigue of textile samples (woven and knitted) as well as technical textiles, non wovens, paper, cardboard, plastics and leather (both synthetic and natural).
- The Opti-Burst is a pneumatic instrument, it measures the required pressure necessary to burst specimens and distension prior to bursting. The sample distension height is measured by means of laser technology. All burst tests performed with Opti-Burst conform to the main international standards; these are preset or freely programmable to suit individual/custom made settings.
Feature of Light fastness tester:
- The OPTI-FADE is specifically designed to perform accelerated light fastness testing on textile samples in accordance to BS 1006
- OPTI FADE + R-F is specifically designed to carry out accelerated light fastness testing on textile samples. The samples are mounted on test cells in the exposure chamber so that all face the light source.
- The Relative Humidity (RH) in the individual cells can be controlled using an aqueous solution in the PTFE container at the bottom of the test chamber.